1.00mm Pitch Female Header Dual Row Straight Type

Shenzhen Antenk Electronics Co., Ltd. introduces a 1.00mm pitch with and without positioning posts, Female Header Dual Row Straight Type, with cap connector, plastic: PA6T / LCP / PA9T (UL 94V-0 Black Contact terminal: brass; plating method: Gold flash, full tin plating, half gold tin plating.

The female connector is widely used in PCB circuit boards in electronics, electrical appliances and meters.
The function of the female connector is to function as a bridge between the blocked or isolated circuits in the circuit, and is responsible for the task of current or signal transmission. Usually used in conjunction with the motherboard to form a board-to-board connection; or used in conjunction with the electronic harness end to form a board-to-wire connection; it can also be used independently for board-to-board connection.

1.No.of Contacts: 01 To 50.

2.Connector Type: Single row.

3.Plastic High:3.70mm(Other sizes can be selected).

4.Insulator Material : PA6T / LCP / PA9T.

5.Packing:Tray / Bag / Tube / Tube+CAP / Tape&Reel / Tape&Reel+CAP.

SPECIFICATION
Current Rating: 0.75Amp
Insulation Resistance: 1000M ohms min
Contact Resistance: 20M ohms max
Dielectric Withstanding: AC500V
Operating Temperature: -65°C  to  +125°C
Contact Material: Brass
Insulator Material: PA6T UL 94V-0 Black